01/02 AWB8230-1413GB
Operation with LCD keypad
47
Menu overview
The following figure shows the sequence in which the parameters
appear on the display. Table 9 provides a brief description of the
parameters.
Table 9: Explanation of the parameters
For a detailed description of the parameters, a section “Setting
Parameters”, page 103.
Figure 40: DF6 keypad menu structure
a The contents of this display depends on which display parameter
(PNU d001 to d090) you have selected.
=
PRG
PRG
PRG
PRG
Display Explanation
Display
parameter
d001 Output frequency display
d002
Output current display
d003
Direction of rotation display
d004
PID feedback display
d005
Digital inputs 1 to 5 status
d006
Status of relay outputs K11 to K34
d007
Scaled output frequency
d012
Motor torque
d013
Output voltage
d014
Electrical input power
d016
Running time
d017
Mains On time
d080
Total fault count
d081
First (most recent) fault
d082
Second fault
d083
Third fault
d084
Fourth fault
d085
Fifth fault
d086
Sixth fault
d090
Warning
Basic
parameters
F001 Frequency setpoint adjustment
F002
Set acceleration time 1
F202
Set acceleration time 1 (second parameter set)
F003
Set deceleration time 1
F203
Set deceleration time 1 (second parameter set)
F004
Direction of rotation adjustment
Extended
parameter
groups
A--- Extended functions group A
b---
Extended functions, group B
C---
Extended functions, group C
H---
Extended functions, group H
P---
Extended functions group P
U---
Extended functions group U
efesotomasyon.com - Klockner Moeller - inverter
To Next Page
Loading...
