01/02 AWB8230-1413GB
Display after the supply
voltage is applied
49
There are now two possibilities:
X Accept the displayed value by pressing the ENTER key.
X Reject the displayed value by pressing the PRG key.
The display shows
A003.
X Press the PRG key.
A--- appears on the display.
X Press the UP key until d001 appears.
X Press the PRG key.
The frequency inverter changes to the display mode and displays
the current frequency.
Display after the supply voltage is applied
After the supply voltage is switched on, the last screen which was
visible before switch off will reappear (but not within the extended
parameter groups).
Figure 42: Changing the base frequency (example with default setting)
a Display dependent on the selected display parameter PNU d001 to d090
b Display of the most recently changed parameter
a
b
A03 = 49.
A03 = 50.
PRG PRG
PRG
PRG
PRG
PRG
ENTER
efesotomasyon.com - Klockner Moeller - inverter
To Next Page
Loading...
