Moog G392-012 User Manual

MSD Single-Axis System Operation Manual AC-AC Servo Drive
ID no.: CA65642-001 06/2018
moog
63
A Appendix
A.1 Current carrying capacity of the servo drives
The maximum permissible servo drive output current and the peak current are
dependent on the mains voltage, the motor cable length, the power stage switching
frequency, the design of the cooling and the ambient temperature. If the conditions
change, the maximum permissible current carrying capacity of the servo drives also
changes.
A.1.1 G392-004A (air cooling, 1 x 230 V AC)
Servo
drive
Switching
frequency of
the power
stage
Ambient
temperature
Rated
current
Peak current [A
eff
]
At 230V
AC
At rotating eld frequen-
cy increasing linearly
0 to 5Hz
For
intermittent
operation
For
time
1)
[kHz] [°C]/[°F] [A
eff
] 0Hz 5Hz >5Hz [s]
G392-004A
(Size 1)
4
+45
(+113)
4 8 8 8
10
8
+40
(+104)
4 8 8 8
12 3.7 7.4 7.4 7.4
16 2.7 5.4 5.4 5.4
Data apply for a motor cable length ≤10 m (32.80 ft).
1) Shutdown as per I²t characteristic
Table A.1 Rated and peak current, Size 1 (air cooling, one-phase)

Moog G392-012 Specifications

General

Brand	Moog
Model	G392-012
Category	Servo Drives
Language	English