Moog G392-012 User Manual

74
MSD Single-Axis System Operation Manual AC-AC Servo Drive
ID no.: CA65642-001 06/2018
moog
A.2.3 G392-090 to G392-170, air cooling
Designation
Technical data
G392-090 G392-110 G392-143 G392-170
Output, motor side
1)
Voltage
2)
3-phase U
Mains
Rated current, effective (l
n
) 90A 110A 143A 170A
Peak current See A.1.3
Rotating eld frequency 0 ... 400Hz
Switching frequency of the power stage
4, 8, 12, 16kHz
Input, mains side
Mains voltage (3x230V/ 3x400V/ 3x460V/ 3x480V) ±10%
Device connected load
1)
(with mains choke)
62kVA 76kVA 99kVA 118kVA
Current
1)
(with mains choke) 90A 110A 143A 170A
Asymmetry of mains voltage ±3%maximum
Frequency 50/60Hz ±10%
Power dissipation at I
N
1)
1300W 1600W 2100W 2500W
DC link
Capacitance 1060µF 2120µF 3180µF 4240µF
Brake chopper switch-on threshold 820VDC
Minimum ohmic resistance of an externally
installed braking resistor
12Ω 10Ω 8.5Ω 6.5Ω
1) Data referred to mains voltage 3x400V
eff
and switching frequency of the power stage 8kHz
2) When designing the drive, it is to be taken into account that the maximum output voltage reduces as a function of the active power.
Table A.11 Technical data, G392-090 to G392-170, air cooling
Designation
Technical data
G392-090 G392-110 G392-143 G392-170
Brake chopper peak power
with external braking resistor
56kW 67kW 79kW 103kW
Optional:
Internal braking resistor
- - - -
Brake chopper peak power
with internal braking resistor
- - - -
1) Data referred to mains voltage 3x400V
eff
and switching frequency of the power stage 8kHz
2) When designing the drive, it is to be taken into account that the maximum output voltage reduces as a function of the active power.
Table A.11 Technical data, G392-090 to G392-170, air cooling
NOTE:
For more information on the brake chopper and braking resistors also refer to
chapter “4.16 Braking resistor (RB)”

Moog G392-012 Specifications

General

Brand	Moog
Model	G392-012
Category	Servo Drives
Language	English