Moog G392-012 User Manual

MSD Single-Axis System Operation Manual AC-AC Servo Drive
ID no.: CA65642-001 06/2018
moog
9
General
1.7 Pictograms
The pictograms used in this operation manual signify the following for the user:
NOTE
Useful information or reference to other documents.
1.(digit)
ACTION TO BE TAKEN
Action undertaken by the user or the system.
You will nd the pictograms used in this operation manual for "safety instructions and
warnings" in chapter 2 Safety.
1.8 Disclaimer
Following the documentation on the devices from Moog is a prerequisite:
y For safe operation.
y To achieve stated performance features and product characteristics.
Moog does not accept any liability for injuries, damage or nancial losses that result from
the failure to follow the documentation.
1.9 Disposal
Follow the applicable national regulations! If necessary, dispose of individual parts,
depending on their characteristics and existing national regulations, e.g. as:
y Electrical waste
y Plastic
y Metal
Or engage a certied disposal organisation with scrapping
1.5 Data on manufacture
On rating plates for the servo drives you will nd the serial number, from which you can
identify the date of manufacture based on the key (Figure 1.3 ). The location of the rating
plate on the MSD Servo Drive can be found to the layouts for the respective
Size 1 to Size 7.
Model:: G392-030-000-002
In: 230 V AC 3ph, 50/60 Hz
4,0 A
0-230 V AC 3ph, 0-400 Hz
3,0 A
Out:
MOOG
D-71034 Böblingen
www .moog.com/industrial
Made in Germany
S/N:D116605 Rev. A
ID : JJWWxxxxx
Year of production
Week of production
Figure 1.3 MSDServoDriveAC-AC hardware rating plate
1.6 Scope of supply
The scope of supply includes:
y MSDServoDrive AC-AC
y Terminal kit for control and power terminals
(depending on device power and variant)
y Set of grommets (for devices with liquid cooling)
y Product CD with booklet

Moog G392-012 Specifications

General

Brand	Moog
Model	G392-012
Category	Servo Drives
Language	English