31
5. Instrument Holder
CAUTION
Before moving the seat or backrest, make sure the instrument holder is
clear and will not be hit by them.
>> Otherwise, the equipment could be seriously damaged.
To adjust the holder’s position, grip the holder or its arm firmly and turn it
slowl
and carefull
.
When adjusting the position or angle of an instrument holder, grip the
holder or its arm firmly and move it carefully.
>> Do not grip the instrument section or use excessive force; this could seriously
dama
e the holder.
Never put a load greater than 10 N (1 kgf) on the assistant’s auxiliary tray.
>> This could seriousl
dama
e it.
Do not load the main tube(when the tray is drawn with the main tube, or
strongly pulls when wiping &etc.).
>> This could result in air or water leaka
e as well as serious dama
e.