86
[7] Inspection
WARNING
For safety and optimum performance, inspect the equipment regularly and
conscientiously according to the instructions in this manual.
>> Otherwise there is a risk of accidents resulting in bodily injury or equipment
dama
e.
If the equipment has not been used for some time, it should be carefully and
completely inspected before use to insure its normal and safe opera- tion.
>> Otherwise there is a risk of accidents resulting in bodily injury or equipment
dama
e.
If the equipment does not operate properly or seems to be out of order,
refer to [8] Troubleshooting of this manual and consult your local dealer or
the Morita Corp.
>> Haphazard disassembl
, repair or modification could be extremel
dan
erous.
Regularly inspect and clean the main plug and socket connection (includ-
ing the ground connection).
>> A build-up of dust and other debris on and around this connection creates the
risk of fire, electrical shock and other accidents.
No modification of this equipment is a allowed.
Do not modify this equipment without authorization of manufacturer.
If this equipment is modified, appropriate inspection and testing must be
conducted to ensure continued safe use of the effect.
>> Haphazard disassembly, repair or modification could be extremely
dan
erous.
For instruments such as the micromotor, scaler, etc. and for devices such as the operating
light, visible light cure etc., refer to the separate user manuals for these devices and the
list below.
The J.Morita Tokyo Mfg. Corp has parts lists and other technical materials
for your convenience and will make them available to you if they are
needed to make repairs or adjustments. Contact information is on the back
of this manual. You may also contact your local dealer.
1. Daily Inspection
The inspections listed in the chart should be performed every day before using the equipment.
If any problems without simple remedies are found, contact your local dealer or the J. Morita Corp.
ADVICE
To Next Page
Loading...
Need help?
General
