63
14. Display*
WARNING
While arranging or moving, please be mindful of security while placing the
unit on display. In particular, excise care that is does not strike the human
body and that the torn arm is not subjected to any impact.
>> Otherwise, an accident or in
ur
ma
occur.
The size and weight of a monitor that can be installed onto the machine are
specified in the operation manual of the optional special tone arm that is
sold separately. Please follow the written directions.
>>Either of these actions could be dan
erous or cause dama
e.
CAUTION
When placing the unit on display, please follow the relevant regulations
and agreement for the IEC60950 (Machine security information) and IEC60065
(security of electron machine) .
>> Otherwise, leaka
e could be result in an accident or in
ur
.
It is possible to place a small screen display on the unit. In this case, a special tone
arm* will be necessary.
Additional parts can be installed after purchase. (However, additional ca- bling work will
be necessary in this case.)
Please contact your local dealer or J.Morita Corp.for details about addi- tional options.
Due to the size and weight limitations of the screen dis- play, not all
displays on the market can be used.
(The model may be specified in some cases)
Please contact your local dealer or J.Morita Corp. for details.
(1) Arm Operation
Joints can be moved and an optional base added if put on special display. Please follow
the directions in the manual.
(2) Display Handling
Please follow the directions in the manual.
CHECK
To Next Page
Loading...
Need help?
General
