4
[1]General Safety and Operation Instructions
1.Safety Symbols and Indicators
This manual uses a system of safety symbols to promote and insure safe operation and prevent injuries,
accidents and damage.
(1) Learn to recognize and understand the meaning of the various symbols shown below.
(2) After reading this manual, keep it in a handy place for ready reference.
(3) Follow all safety instructions without exception.
SAFETY SYMBOLS CHART
WARNING
This indicates the possibility of serious bodily injure or death and serious
dama
e if the safet
instructions are not followed.
CAUTION
This indicates the possibility of minor bodily injury or damage if the safety
instructions are not followed.
Symbols
This symbol indicates a WARNING or CAUTION instruction.
This symbol indicates an operation or procedure which MUST NOT be
performed.
This symbol indicates an instruction which MUST BE followed.
This symbol indicates a warning for high temperatures which MUST BE
followed.
This symbol indicates an instruction a pay attention to dangerous voltage.
This symbol indicates the B type cavity that MUST BE followed.
｜
This symbol indicates an instruction Main Switch(ON).
○
This symbol indicates an instruction Main Switch(OFF).
This symbol indicates that reference to the operation manual is needed.
2. Operation Advice and Hints
Certain key points concerning operation are
indicated by the symbols shown in the chart to
the right. These are points to help the operator
use the equipment more easily.
3. Operational Purpose of Equipment
WARNING
SIGNO G10-2 is a dental treatment unit and must not be used for any other
purpose.
>>Use for any purpose not designated is dangerous and could result in
accidents or dama
e to the equipment.
Advizze Hints Symbols Chart
Indicates advice concerning
operation.
Indicates points which should
be check during operation.
ADVICE
CHECK
To Next Page
Loading...
Need help?
General
