75
6. Cleaning Other Components and Surfaces
WARNING
Do not allow water, chemical solutions or ethanol to remain on the
surfaces or inside the equipment.
Do not wash the switch panels or auto filler with water; the water could
seep inside.
If water, chemical solutions or ethanol accidentally get on or inside the
equipment, turn off the main switch. Then dry the equipment off
thoroughly.
>> Otherwise, there is a risk of an accident due to a short circuit or equipment
damage such as discoloration or damage to materials leading to a
malfunction.
CAUTION
Never use any type of cleaner except the one provided or a neutral deter-
gent.
>> Benzene, thinners, other types of solutions, or chemically treated cloths
exceptfor disinfecting ethanol could cause discoloration or other types of
dama
e resultin
in a malfunction.
Do not get floor cleaners or wax on the base or the foot pedal. If floor cleaner
or wax happens to get on these components, wipe it off immediately.
>> These substances could cause discoloration or damage the components
resultin
in a malfunction.
Never splash water or cleaning solutions directly on the main switch.
>>This could cause a malfunction.
If any chemical solutions are accidentally spilled on the instrument holder
or tray, wipe them off immediately with a piece of gauze moistened with a
little disinfecting ethanol. Take care that none of the ethanol seeps inside
the unit.
>> If the chemicals are not removed, they could cause discoloration or degrade the
material.
To Next Page
Loading...
Need help?
General
