25
Press Up and Down keys to
change menus
Press Enter to select a menu.
Change setting with Right or
Left key Press Enter again.
(7) Menu Selection and User Settings (Swing Type)
Put away all the doctor and assistant instruments so that the Main
Display appears. Then press the Up and Down cursor keys to view
the various menus.
Press Enter to select a menu and then press the Left or Right cursor
key to change the setting. Finally press Enter again.All settings will
be memorized.
To return to the Main Menu,pick up any instrument.
The Main Menu will appear when you put the
instrument away.
Change Main Display.
You can use any of the 5 menus described below as the Main
Dis play. Select the one you use most frequently.
Simply select the desired menu and hold down the Enter key for
5 seconds to make it the Main Display.
1) Handpiece Lock
This will disable the selected doctor instrument. Use this if an
instrument has been disconnected.
The locked instrument cannot be used and will not respond if it
is picked up.
a) Display the Handpiece Lock Menu and press Enter.
b) Use the Right or Left cursor key to select the number of the
instrument. Press the Enter key to lock it or unlock it.
c) The numbers from 2 to 6 on the holder correspond to various
handpieces.
The lamp for a locked instrument will be green and blink on
and off. Repeat step b) above to lock or unlock other
handpieces.
d) Hold down the Enter key for 2 seconds when you are
finished to go back to the Main Display.
ADVICE
Hold down Enter for 5 seconds
to change Main Display
Press Enter to select and
change
Hold down for 2 seconds to
complete the procedure.
To Next Page
Loading...
Need help?
General
