Display Status Symbols Menu Entries (Use With Menu Navigation)
m
Receiving an individual call.
p
The radio is in the view or program mode;
On Steady = view mode; Blinking =
program mode.
s
Received signal strength for the current
site (trunking only). The more stripes in the
symbol, the stronger the signal.
b
Blinks when the battery is low.
r
You are talking directly to another radio or
through a repeater; On = direct;
Off = repeater.
C
This channel is being monitored.
c
Your radio is in secure operation;
On = secure operation;
Off = clear operation; Blinking = receiving
an encrypted voice call.
T
The radio is scanning a scan list.
S
Priority 1 Channel during scan.
S
Priority 2 Channel during scan.
Entry Menu Selection Page
BATT Smart Battery 17
CALL Private Call/Selective Call 57/60
CHAN Select a Channel 24
CLCK Set the Real Time Clock 90
DIR Repeater/Direct 70
ERAS Key Zeroization 78
KEY Key Selection 75
KSET Keyset Selection 76
MUTE Keypad Mute 33
PAGE Call Alert Page 64
PHON Phone 52
Entry Menu Selection Page
PROG Editing 42
PWR TX Power Level 31
REKY Rekey Request 80
RPGM Reprogram Request 83
SCAN Scan On/Off 48
SITE Site Lock 87
STS Status Call 68
TGRP Talkgroup Call 66
TMS Text Messaging 104
USER User Login 99
VIEW Viewing a List 41
ZONE Zone 22
LOC Location 92
Menu Navigation
u to find Menu Entry
D, or E, or F directly below
Menu Entry to select
h to exit
v or u to scroll through sub-list
D, or E, or F directly below
Menu Entry to select
94C26_XTS5000Mdl2.book Page ii Friday, June 25, 2010 5:23 PM
To Next Page
Loading...
Need help?
General
