30
General Radio Operation
Conventional Mode Operation
Your radio may be programmed to receive Private-LineĀ® (PL) calls:
1 Momentarily press the
Monitor button to listen for
activity. The Carrier Squelch
indicator is displayed.
2 Press and hold the Monitor
button to set continuous
monitor operation. (The
duration of the button press
is programmable.)
3 Press the Monitor button
again, or the PTT button, to
return to the original squelch
setting.
Note: If you try to transmit on a receive-only channel, you will hear
an invalid tone until you release the PTT button.
C
94C26_XTS5000Mdl2.book Page 30 Friday, June 25, 2010 5:23 PM