42
Common Radio Features
Edit a Scan List
This feature lets you change scan list members and priorities.
Use the Menu
1 Press u to find PROG.
2 Press D, E, or F
directly below PROG. You see
SCAN.
3 Press D, E, or F
directly below SCAN. You see
the first list member. p
(blinking) indicates the
programming mode.
4 Press v or u to find the
member you want to change.
5 Press D, E, or F directly
below SEL or DEL or RCL.
SEL = add and/or change the priority of the currently displayed
channel in the scan list.
DEL = delete the currently displayed channel from the scan list.
RCL = view the next member of the scan list.
Note: The maximum number of members for a trunking priority
monitor scan list is 15; for a conventional scan list, 15; and
for a talkgroup scan list, 10.
6 To change the priority of the
currently displayed channel,
press D, E, or F
below SEL additional times to
see
T or S or S or no icon.
PROG
SCAN
FIRE DISP NW p
SEL DEL RCL
SEL DEL RCL
T or S or S or no icon
94C26_XTS5000Mdl2.book Page 42 Friday, June 25, 2010 5:23 PM
To Next Page
Loading...
