40
Common Radio Features
Note: For ALL Emergency signals, when changing channels:
• If the new channel is also programmed for Emergency, you can
change channels while in Emergency operation. The
emergency alarm or call continues on the new channel.
• If the new channel is NOT programmed for Emergency, you
hear an invalid tone until you exit the Emergency state or
change to a channel programmed for emergency.
Emergency Keep-Alive
With Emergency Keep-Alive enabled, if the radio is in the Emergency
state, you cannot turn off the radio by using the On/Off Volume
Control knob.
With Keep-Alive, the radio will only exit the Emergency state using
one of the ways mentioned in the previous sections (Emergency
Alarm, Silent Emergency Alarm, or Emergency Call).
94C26_XTS5000Mdl2.book Page 40 Friday, June 25, 2010 5:23 PM
To Next Page
Loading...
