68
Common Radio Features
Status Calls (ASTRO 25 Trunking Only)
You can send data calls to the dispatcher about a predefined status.
Each status can have up to a 12-character name. A maximum of
eight status conditions is possible.
Send a Status Call
Use the Menu
1 Press u to find STS.
2 Press D, E, or F
directly below STS. The last
acknowledged status call, or
the first status in the list, is
displayed.
3 Press v or u to find the
status you wish to send.
4 Press the PTT button to send
the status.
When the dispatcher
acknowledges, four tones
sound, ACK RECEIVED is
displayed, and the radio
returns to normal dispatch
operation.
OR
• Four tones
If no acknowledgment is
received, you will see NO
ACKNOWLDG and hear a low-
pitched tone.
• Single tone
5 Press h to go to the home
display
STS
ACK RECEIVED
NO ACKNOWLDG
94C26_XTS5000Mdl2.book Page 68 Friday, June 25, 2010 5:23 PM
To Next Page
Loading...
