48
Common Radio Features
Scan
The scan feature allows you to monitor traffic on different channels by
scanning a preprogrammed list of channels. Your radio can have up
to 32 different scan lists. These lists must be preprogrammed by a
qualified radio technician.
• To view your radio’s scan lists, see “View a List” on page 41.
• To change your radio’s scan lists, see “Edit a Scan List” on
page 42.
Turn Scan On or Off
Use the Menu
Use the Preprogrammed Scan On/Off Switch
1 Press u to find SCAN.
2 Press D, E, or F
directly below SCAN. You see
the current scan state.
The scan status symbol is
displayed when scan is on.
OR
3 Press D, E, or F
directly below ON or OFF.
OR
You can press h or the PTT
button to exit scan and return
to the home display without
changing the scan state.
Place the Scan switch in the
Scan On or Scan Off position.
The scan status symbol is
displayed when scan is on.
SCAN
SCAN ON T
ON OFF
SCAN OFF
ON OFF
SCAN
T
94C26_XTS5000Mdl2.book Page 48 Friday, June 25, 2010 5:23 PM
To Next Page
Loading...
