Motorola ASTRO XTS 5000 User Manual

60
Common Radio Features
Answer a Selective Call
Initiate a Selective Call
1 When a Selective Call is
received, you hear two alert
tones, the LED blinks
GREEN, the call received
symbol (
m) blinks, and CALL
RECEIVD is displayed.
•Two tones
• Blinking GREEN LED
2 The display will remain active
for two seconds, and then the
speaker will unmute.
3 Press and hold the PTT
button to talk; release it to
listen.
4 Press h to hang up and return
to the home display.
1 Press u to find CALL.
2 Press D, E, or F
directly below CALL. You see
the last transmitted or
received ID number.
3 Go to “Select an ID Number”
on page 61.
OR
Go to “Make a Selective Call”
on page 61.
CALL RECEIVD m
CALL
ID: 702345
LIST
94C26_XTS5000Mdl2.book Page 60 Friday, June 25, 2010 5:23 PM

Motorola ASTRO XTS 5000 Specifications

General

Channel Capacity	1000 Channels
Emergency Button	Yes
GPS	Optional
Frequency Range	136-174 MHz, 380-470 MHz, 764-870 MHz
Dimensions	5.5 x 2.5 x 1.5 inches
Water Resistance	IP67
Digital Protocol	APCO P25 Phase 1 and Phase 2
Encryption	AES, DES
Display	LCD with backlight
MIL-STD-810	Meets MIL-STD-810 C/D/E/F/G
Battery Type	Li-Ion
Operating Temperature	-30°C to +60°C