76
Special Radio Features
Keyset Selection
This feature allows you to select one or more groups of several
encryption keys from among the available keys stored in the radio.
For example, you could have a group of three keys structured to one
keyset, and another group of three different keys structured to
another keyset; by changing keysets, you would automatically switch
from one set of keys to the other. Every channel to which one of the
original keys was tied will now have the equivalent new key instead.
Note: If the selected key is
erased, KEY FAIL will be
displayed and a
momentary keyfail tone
will be generated.
If the selected key is not
allowed, ILLEGAL KEY
will be displayed and a
momentary illegal key
tone, similar to the key
fail tone, will be
generated.
1 Press U until KSET appears
on the display.
2 Press D, E, or F
directly below KSET. The
display changes to show the
last user-selected and stored
keyset and the available
keyset menu selections.
3 Press D, E, or F
directly below the desired
keyset.
KEY FAIL
ILLEGAL KEY
KSET
KEYSET 1
SEL
KS1 KS2
94C26_XTS5000Mdl2.book Page 76 Friday, June 25, 2010 5:23 PM
To Next Page
Loading...
Need help?
General
