Representation Description
%BAR
The equivalent of yyy % is represented in an eight-
segment bar.
6.7
Power Saver Menu
Figure 1
1: Power Saver Menu
To meet certain government low standby power limits, Power Saver mode enables the charger to turn off all
pockets except Pocket 1 when there is no activity in those pockets for a period. The following are examples
of activities included:
●
Radio or battery charging
● Lithium-Ion Battery preparation for shipment
● IMPRES 2 battery preparation for Long-Term Storage
● Charger Setup Mode
● Charger Analysis Mode
● Charger Reprogramming
● Communicating with the IMPRES 2 Battery Fleet Management System
● Any flashing LED indication.
Pocket 1 remains on, but may be sleeping. To turn on the other pockets, press any keypad button. Until other
pockets are turned on, they cannot respond to radio or battery insertion, or removal.
6.8
Entry Time Menu
Entry Time is the hold time required to press the left arrow and right arrow buttons simultaneously to enter
Charger Setup mode or Charger Analyzer mode.
MN009418A01-AD
Chapter
6: Charger Setup
31
To Next Page
Loading...
