Chapter 10
IMPRES Battery Fleet Management
System
IMPRES Battery Fleet Management is applicable to both IMPRES and IMPRES 2 batteries and chargers.
The Battery Fleet Management software automatically collects critical data from IMPRES or IMPRES 2
batteries that are inserted into an IMPRES or IMPRES 2 charger.
The critical data include battery age, capacity, charge, date when manufactured, and date when put into
service. The Battery Fleet Management software analyzes battery data, communicates battery health, and
recommends when to replace the battery. The software can quickly and efficiently determines whether or not
to redeploy the battery to a less demanding user, when to purchase a new replacement battery, or that a
battery is missing.
The Battery Fleet Management delivers the following battery-critical information:
● When batteries are below an acceptable capacity.
● Helps to ensure that users have enough capacity for a full work shift.
● Identifies low-capacity batteries so they can be removed from service.
● Eliminates unexpected downtime and work interruptions.
● Avoids the expense of throwing batteries away prematurely.
● Confirms that chargers are optimally distributed and used.
For more information on the Battery Fleet Management, refer to the following manuals:
● MN007473A01, IMPRES
™
Battery Fleet Management Installation Manual
● MN007495A01, IMPRES
™
Battery Fleet Management User Guide
● MN007501A01, IMPRES
™
Battery Fleet Management Troubleshooting Guide and External Software and
Component Configuration Guide
● MN008435A01, IMPRES
™
Battery Fleet Management WEB Interface User Guide for Release 4.0
MN009418A01-AD
Chapter
10: IMPRES Battery Fleet Management System
47
To Next Page
Loading...
