Motorola LI4278 LINEAR IMAGER Product Reference Guide

CHAPTER 8 USB INTERFACE
Introduction
This chapter provides instructions for programming the cradle to interface with a USB host. The linear imager
scanner cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle
and recharge the linear imager scanner battery, but this charging method has limitations. See Supplying Power
to the CR0078-S/CR0008-S Cradle on page 1-8.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
*North American Standard USB Keyboard
Feature/Option
*Indicates Default
NOTE The CR0078-S cradle has the ability to be powered by the USB port instead of an external power supply.
The CR0078-P can only receive power via an external power supply.

Motorola LI4278 LINEAR IMAGER Specifications

General

Scan Rate	547 scans per second
Decode Capability	1D barcodes
Scan Pattern	Single line
Light Source	LED
IP Rating	IP42
Scanner Type	Linear Imager
Battery	Rechargeable Li-ion battery
Drop Specification	1.8 m (6 ft) drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Technology	Linear Imager
Radio Range	Up to 100 m (330 ft) in open air
Interface	USB, RS232, Keyboard Wedge
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Weight	7.9 oz./224 g
Dimensions	9.8 cm H x 7 cm W x 18.6 cm L (3.8 in H x 2.7 in W x 7.3 in L)