About This Guide xxi
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, GETTING STARTED provides a product overview, unpacking instructions, and cable
connection information.
•
Chapter 2, SCANNING describes parts of the linear imager scanner, beeper and LED definitions, and
how to use the linear imager scanner.
•
Chapter 3, MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS provides
information on how to care for the linear imager scanner and cradle, troubleshooting, and technical
specifications.
•
Chapter 4, RADIO COMMUNICATIONS provides information about the modes of operation and features
available for wireless communication. This chapter also includes programming bar codes to configure
the linear imager scanner.
•
Chapter 5, USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS provides programming
bar codes for selecting user preference features for the linear imager scanner and commonly used bar
codes to customize how the data is transmitted to the host device.
•
Chapter 6, KEYBOARD WEDGE INTERFACE provides information for setting up the linear imager
scanner and cradle for Keyboard Wedge operation.
•
Chapter 7, RS-232 INTERFACE provides information for setting up the linear imager scanner and cradle
for RS-232 operation.
•
Chapter 8, USB INTERFACE provides information for setting up the linear imager scanner and cradle for
USB operation.
•
Chapter 9, IBM INTERFACE provides all information for setting up the linear imager scanner and cradle
with IBM 468X/469X POS systems.
•
Chapter 10, 123SCAN2 (PC based scanner configuration tool) enables rapid and easy customized setup
of scanners.
•
Chapter 11, SYMBOLOGIES describes all symbology features and provides the programming bar codes
necessary for selecting these features for the linear imager scanner.
•
Chapter 12, ADVANCED DATA FORMATTING (ADF) describes how to customize scanned data before
transmitting to the host. This chapter also contains the bar codes for advanced data formatting.
•
Appendix A, STANDARD DEFAULT PARAMETERS provides a table of all host devices and
miscellaneous linear imager scanner defaults.
•
Appendix B, PROGRAMMING REFERENCE provides a table of AIM code identifiers, ASCII character
conversions, and keyboard maps.
•
Appendix C, SAMPLE BAR CODES includes sample bar codes.
•
Appendix D, NUMERIC BAR CODES includes the numeric bar codes to scan for parameters requiring
specific numeric values.
•
Appendix E, ALPHANUMERIC BAR CODES includes the bar codes representing the alphanumeric
keyboard, used when setting ADF rules.
•
Appendix F, ASCII CHARACTER SETS provides ASCII character value tables.
To Next Page
Loading...
Need help?
General
