Name: Motorola LI4278 LINEAR IMAGER
Brand: Motorola
Rating: 4 (1 reviews)

To Next Page

To Previous Page

RADIO COMMUNICATIONS 4 - 17

Out of Range Indicator

An out of range indicator can be set by scanning Enable Beep on Reconnect Attempt on page 4-14 and

extending the time using the Reconnect Attempt Interval on page 4-15.

For example, with Beep on Reconnect Attempt disabled while the linear imager scanner loses radio connection

when it is taken out of range, the linear imager scanner attempts to reconnect silently during the time interval

set by scanning a Reconnect Attempt Interval.

When Beep on Reconnect Attempt is enabled, the linear imager scanner emits 5 high beeps every 5 seconds

while the reconnection attempt is in progress. If the Reconnect Attempt Interval is adjusted to a longer period

of time, such as 30 minutes, the linear imager scanner emits 5 high beeps every 5 seconds for 30 minutes

providing an out of range indicator.

Beep on Insertion

Parameter # F0 20h

When a linear imager scanner is inserted into a cradle and detects power, it emits a short low beep. This

feature is enabled by default.

To enable or disable beeping on insertion, scan the appropriate bar code below.

*Enable Beep on Insertion

(00h)

Disable Beep on Insertion

(01h)

Other manuals for Motorola LI4278 LINEAR IMAGER

Questions and Answers:

Need help?

Do you have a question about the Motorola LI4278 LINEAR IMAGER and is the answer not in the manual?

General