Motorola LI4278 LINEAR IMAGER Product Reference Guide

STANDARD DEFAULT PARAMETERS A - 7
Discrete 2 of 5 (DTF)
Discrete 2 of 5 Disable 11-45
Set Length(s) for D 2 of 5 12 11-45
Codabar (NW - 7)
Codabar Disable 11-47
Set Lengths for Codabar 5 to 55 11-47
CLSI Editing Disable 11-49
NOTIS Editing Disable 11-49
Codabar Upper or Lower Case Start/Stop Characters
Detection
Upper Case 11-50
MSI
MSI Disable 11-51
Set Length(s) for MSI 4 to 55 11-51
MSI Check Digits One 11-53
Transmit MSI Check Digit Disable 11-53
MSI Check Digit Algorithm Mod 10/Mod 10 11-54
Chinese 2 of 5
Enable/Disable Chinese 2 of 5 Disable 11-55
Matrix 2 of 5
Enable/Disable Matrix 2 of 5 Disable 11-56
Matrix 2 of 5 Lengths 1 Length - 14 11-57
Matrix 2 of 5 Check Digit Disable 11-58
Transmit Matrix 2 of 5 Check Digit Disable 11-58
Korean 3 of 5
Korean 3 of 5 Disable 11-59
Inverse 1D
Inverse 1D Regular 11-60
GS1 DataBar
GS1 DataBar-14 Enable 11-61
GS1 DataBar Limited Disable 11-61
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.

Motorola LI4278 LINEAR IMAGER Specifications

General

Scan Rate	547 scans per second
Decode Capability	1D barcodes
Scan Pattern	Single line
Light Source	LED
IP Rating	IP42
Scanner Type	Linear Imager
Battery	Rechargeable Li-ion battery
Drop Specification	1.8 m (6 ft) drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Technology	Linear Imager
Radio Range	Up to 100 m (330 ft) in open air
Interface	USB, RS232, Keyboard Wedge
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Weight	7.9 oz./224 g
Dimensions	9.8 cm H x 7 cm W x 18.6 cm L (3.8 in H x 2.7 in W x 7.3 in L)