9 Using MC35 Companion Programs
Product download-related programs
197
8Tap Misc(3) tab, then set the following options:
• Tap the “Use DHCP server” check box to specify whether the AirBEAM
Smart Client uses the DHCP response option 66 to specify the IP
address of the FTP/TFTP server.
• Tap the “Use DHCP bootfile” check box to specify whether the
AirBEAM Smart Client uses the DHCP response option 67 to specify
the Package and Package 1 parameters.
• Tap the “Passive Mode” check box to specify whether the Client uses
passive mode FTP. This setting is ignored if TFTP protocol is used.
9Tap Misc(4) tab, then set the following options:
• In the Sched Mode
drop-down list, specify whether (and how) the
scheduled mode is enabled. If enabled, schedule mode causes the
AirBEAM synchronization process to occur periodically. The selections
include:
• Disable - The schedule mode is disabled.
• Fixed time - The schedule mode is enabled. The AirBEAM
synchronization will be launched once per day at the time specified in the
Sched Time setting. The synchronization will be launched every day
Sched Time minutes past midnight.
• Fixed period - The schedule mode is enabled. The AirBEAM
synchronization will be launched at a period by the Sched Time setting.
The synchronization will be launched every Sched Time minutes.
• In the Sched Time
field, specify, in minutes, the period for the schedule
mode. The Sched Mode setting specifies how the Sched Time value is
used.
To Next Page
Loading...
Need help?
General
