2 System Tour
Hardware interface
14
Soft buttons and keypad
The MC35 keypad has alphanumeric keys that produce the 26-character alphabet (A-Z,
both lowercase and uppercase), numbers (0-9), and assorted special characters. The
keypad is color-coded to indicate when the modifier key is pressed to produce a
particular character or action. In addition to alphanumeric keys, the keypad also has soft
buttons and special keys to launch particular applications, control the screen backlight,
and display the on-screen keyboard.
NOTE: The keypad illuminates when a key is pressed and stays lit for approximately
five seconds.
No. Component Description
1 Send button • When there’s an incoming call, press to accept
the call.
• During an ongoing call, press and hold to toggle
on/off the speakerphone mode.
• From Speed Dial, press to call the currently
selected number.
• From Call History, press to call the currently
selected log item.
• In Messaging, press to send a composed e-mail/
text message or display options for a received
e-mail/text message.
• Change between an active call and call that is on
hold.
2 Start button Press to display the Start menu.
3 Left soft button Press to perform the function indicated on the lower
left corner of the display.
4 Joystick • Press the center of the joystick to access menu
options and confirm your selection.
• Move the joystick in a left, right, up or down
direction to navigate through the menu options.
5 Right soft button Press to perform the function indicated on the lower
right corner of the display.
6 OK button Press to close the active program and display the
Today screen.
1
3
2
4
5
6
7
8
9
10
11
To Next Page
Loading...
Need help?
General
