To Next Page

To Previous Page

6 - 4 MC75A Enterprise Digital Assistant User Guide

With Microsoft Bluetooth Stack

Performing a cold boot retain the state of the Bluetooth radio prior to the cold boot.

Warm Boot

With StoneStreet One Bluetooth Stack

Performing a warm boot on the MC75A turns off Bluetooth.

With Microsoft Bluetooth Stack

Performing a warm boot retain the state of the Bluetooth radio prior to the warm boot.

Suspend

When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the active

connection. When there is no active connection, the Bluetooth radio turns off.

With StoneStreet One Bluetooth Stack

With Microsoft Bluetooth Stack

Resume

When the MC75A resumes, Bluetooth turns on if it was on prior to suspend.

Using Microsoft Bluetooth Stack

The following sections provide information on using the Microsoft Bluetooth stack.

Turning the Bluetooth Radio Mode On and Off

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the

radio is off, other Bluetooth devices cannot see or connect to the MC75A. Turn on the Bluetooth radio to exchange

information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity.

Enabling Bluetooth

To enable Bluetooth:

NOTE If there is an active Bluetooth connection between the MC75A and another Bluetooth device, the MC75A will

not timeout. However, if the user presses the Power button on the MC75A, the MC75A will suspend (except

when on a call) and upon receiving data from a remote Bluetooth device, the MC75A will wake from suspend

mode. For example, headset redial or Bluetooth scanner sending data to the MC75A.

NOTE If there is an active Bluetooth connection between the MC75A and another Bluetooth device and there is no

data activity, the MC75A will timeout. However, if the user presses the Power button on the MC75A, the

MC75A will suspend (except when on a call) and upon receiving data from a remote Bluetooth device, the

MC75A will wake from suspend mode. For example, headset redial or Bluetooth scanner sending data to the

MC75A.

NOTE To achieve the best battery life turn off radios not in use.

Motorola MC75A User Manual

Other manuals for Motorola MC75A