7 - 10 MC75A Enterprise Digital Assistant User Guide
Removing the MC75A
To remove the MC75A, hold back the release lever on the cradle and pull the MC75A up and out of the cradle.
Figure 7-6
Removing the MC75A
Charging the Spare Battery
Insert a spare battery to begin charging:
1. Lift the battery release lever.
Figure 7-7
Inserting the Spare Battery
2. Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up and
to the rear of the cradle.
Battery
Battery Release Lever
To Next Page
Loading...
