Chapter 4 Using the Phone
Introduction
Use the MC75A to make phone calls, set up speed dials, keep track of calls, and send text messages. Your
wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID.
Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
Connect to the Internet or work network over High-Speed Downlink Packet Access (HSDPA) (MC75A6) or
Evolution Data-Optimized (EvDO) (MC75A8) using Cellular Line, or using the modem specified by the mobile
operator. For more information, or to customize the MC75A phone by changing phone settings, see the MC75A
Integrator Guide.
Accessing the Phone Keypad
Access the keypad regardless of the program in use. Applications on the MC75A can be in use during a call.
Figure 4-1
Phone Keypads
NOTE Keypads vary depending on the carrier, services and the state of the phone. For example, place calls on hold
and use Swap to switch active calls on hold. (See Conference Calling on an MC75A6 on page 4-19.)
Antenna Signal
MC75A8
MC75A6
To Next Page
Loading...
Need help?
General