Using Bluetooth 6 - 5
1. Tap Wireless Manager and then tap the Bluetooth bar or
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Figure 6-1
Bluetooth Mode Tab
2. Check the Turn On Bluetooth checkbox.
3. Tap OK.
Disabling Bluetooth
To disable Bluetooth:
1. Tap Wireless Manager and then tap the Bluetooth bar or
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
2. Un-check the Turn On Bluetooth checkbox.
3. Tap OK.
Discovering Bluetooth Device(s)
The MC75A can receive information from discovered devices without bonding. However, once bonded, the MC75A
and a bonded device exchange information automatically when you turn the Bluetooth radio on. See Bonding with
Discovered Device(s) on page 6-32 for more information.
To find Bluetooth devices in the area:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3. Ensure that the two devices are within 30 feet (10 meters) of one another.
4. Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
To Next Page
Loading...
