Motorola MC75A - Resetting the MC75 A

Using the MC75A 2 - 17
Resetting the MC75A
There are two reset functions, warm boot and cold boot. A warm boot restarts the MC75A by closing all running
programs. A cold boot also restarts the MC75A, and also resets the clock. Data saved in flash memory or a
memory card is not lost.
If the MC75A is not functioning properly, perform a warm boot first. If the MC75A still does not respond, perform a
cold boot.
Performing a Warm Boot
Hold down the Power button for approximately five seconds. As soon as the MC75A starts to boot release the
Power button.
Figure 2-16 Warm Boot Splash Screen
Performing a Cold Boot
To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.
Figure 2-17 Cold Boot Splash Screen