6 - 26 MC75A Enterprise Digital Assistant User Guide
Fetching a Contact
To fetch a contact from another device:
1. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Figure 6-27
OBEX Object Push Window
2. In the Action: drop-down list, select Fetch Contact information.
3. Tap OK. The contact on the other device is copied.
Sending a Picture
To send a picture to another device:
1. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Figure 6-28
OBEX Object Push Window
2. In the Action: drop-down list, select Send A Picture.
3. Tap . The Send Local Picture window appears.
NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC75A is connectable.