149
Alias Use the UP/DOWN arrow keys to enable/disable the System Alias
feature. If Alias is enabled, the upper eight bits of the System ID are
ignored.
The default is Disabled.
Individual ID This field will be accessible only for Type I radios. Enter the three-digit ID
for this system. Examples are 001, 02A, 1FF and 200. An actual ID must
be entered, not a personality number.
The default is 1-0001.
Connect Tone (Hz) # This field is not applicable to SmartZone systems. Use the UP/DOWN
arrow keys to make your selection or enter the desired value directly.
The Connect Tone is a sub-audible tone required on the voice channel
to access the Trunked repeater. The function is similar to the
Conventional Repeater Access Tone.
Coverage Type A system key or FTR key is required to access this field. The choices for this
field are:
Up to four control channels are used for standard trunking operation
and up to eight are used for WAC AMSS, regardless of the number
listed on the Control Channel Screen (F4/F4/F3/F6).
In an AMSS system, multiple sites are linked together to form a larger
Trunked system. Radios programmed for Wide Area AMSS can use the
site that they are within range of, and when they move between sites,
they can switch sites without interruption of communications that are
in progress. Up to eight control channels can be used for Wide Area Systems.
If WAC AMSS is selected and WAC AMSS Failsoft is selected on the
TRUNKING PERSONALITY screen (F4/F4/F4), the F6 key on the
TRUNKING PERSONALITY screen will be used to view and modify
failsoft channel information. Radios programmed for Local AMSS are
allowed to use only one site. This site is entered as the Site ID below the
Coverage Type field.
The default is Disabled.
Site ID This field will be visible only if the Coverage Type field is set to Local AMSS.
Enter the Site ID directly or use the UP/DOWN arrow keys to make
your selection.
0 - 105.88 Hz 4 - 97.3 Hz.
1 - 76.60 Hz 5 - 116.13 Hz
2 - 83.72 Hz 6 - 128.57 Hz
3 - 90.00 Hz 7 - 138.46 Hz
WAC AMSS Wide Area Coverage Automatic Multiple Site Select.
Local AMSS Local Automatic Multiple Site Select.
SmartZone Motorola system for wide area roaming.
Disabled Disable wide area coverage.
To Next Page
Loading...
Need help?
General