151
Universal ID (Type I Only) Enter the desired ID directly. When Trunking Type I is selected, a
Universal ID is used. All individual calls (Phone, Private Call, and Call
Alert) will be received if they are addressed to the Universal ID, even
though the operator might have selected another personality in that
system. This simplifies individual communications with the radio. In
addition, the radio will initiate all Private and Phone Calls with the
Universal ID. Therefore, only one ID must be enabled for each radio at
the Central Site Controller. The radio will also respond to Dynamic
Regrouping commands to the Universal ID, making it easier for a
regrouping console to regroup a radio.
The default is 1.
Size Code A system key or FTR key is required to access this field. Use the UP/DOWN
arrow keys to choose the Size Code for this fleet. The Size Code
determines the maximum number of fleets, subfleets and individual
IDs allowed. Valid size codes are: A, B, C, D, E, F, G, H, I, J, K, M, O and
Q.
Note: The size code and fleet ID chosen must match the
programming of the Central Controller.
Fleet ID A system key or FTR key is required to access this field. The Fleet ID is a
three-digit hexadecimal number where the first digit is the prefix and
the second two digits refer to the fleet. For any size code, the subfleets
for Fleetwide and Dynamic Regrouping are always available.
The valid range for the Fleet I depends on the size code chosen. Examples of
Fleet IDs are 300, 402, 001, and 703.
Size Code Prefix Fleet Subfleet
Individual
ID
A 0 - 7 00 - 7F A - C 000 - 00F
B 0 - 7 00 - 0F A - G 000 - 03F
C 0 - 7 00 - 07 A - G 000 - 07F
D 0 - 7 00 - 00 A - O 000 - 1FF
E 0 - 7 00 - 3F A - C 000 - 01F
F 0 - 7 00 - 1F A - G 000 - 01F
G 0 - 7 00 - 1F A - C 000 - 03F
H 0 - 7 00 - 0F A - C 000 - 07F
I 0 - 7 00 - 07 A - C 000 - 0FF
J 0 - 7 00 - 03 A - G 000 - 0FF
K 0 - 7 00 - 01 A - O 000 - 0FF
M 0 - 3 00 - 00 A - O 000 - 3FF
O 0 - 1 00 - 00 A - O 000 - 7FF
Q 0 - 0 00 - 00 A - O 000 - FFF
To Next Page
Loading...
Need help?
General