156
Field Definitions
System Use the UP/DOWN arrow keys or the F3/F4 keys to scroll through the
available systems.
Tx Frequency Enter the Control Channel Transmit frequency directly in MHz. Four
Control Channel Frequencies are standard (eight if Wide Area AMSS is
enabled and one for Local AMSS). Control channels must be entered in
ascending (increasing) order.
Rx Frequency Enter the Control Channel Receive frequency directly in MHz. Four
Control Channel Frequencies are standard (eight if Wide Area AMSS is
enabled and one for Local AMSS). Control channels must be entered in
ascending (increasing) order.
To Next Page
Loading...
Need help?
General