178
Field Definitions
Personality Displays the number of the current personality.
Talkgroup/Subfleet This screen is used to enter subfleets that will use each personality.
Once the talkgroups/subfleets are entered, they are assigned to a Zone/
System and a Channel/Subfleet selector position on the ZONE/
SUMMARY screen (F4/F8).
Rx Frequency Enter the Receive frequency directly in MHz. Four Control Channel
Frequencies are standard (eight if Wide Area AMSS is enabled and one for
Local AMSS).
Tx Frequency Enter the Transmit frequency directly in MHz. Four Control Channel
Frequencies are standard (eight if Wide Area AMSS is enabled and one for
Local AMSS).
Failsoft (not shown) Use the UP/DOWN arrow keys to enable/disable Failsoft for this
talkgroup. When the Central Site Controller fails in a Trunked system,
the system goes into Failsoft operation. If the radio is set to Failsoft by
Talkgroup, the radio will use these frequencies to transmit and receive
on.
F/S Frequency (not shown) Enter the Failsoft Frequency directly in MHz. A transmit and receive
frequency each are required if the system is UHF or VHF.
Strapping This field will be visible only if the radio (or associated codeplug) is SECURE-
equipped. This field configures the transmit mode of the talkgroup or
subfleet. If set to Clear or SECURE, the talkgroup or subfleet is forced
to that particular transmit mode. When set to Select, the user is
allowed to choose between SECURE and Clear transmit modes using a
button programmed to SECURE on the radio.
To Next Page
Loading...
Need help?
General