205
Scan List Use the UP/DOWN arrow keys to select the Scan List to be used for this
personality. To change or view the scan list, access the SCAN LIST
screen (F4/F3/F5). Conventional personalities may use Conventional
or Talkgroup type scan lists.
The default is None.
Hot Keypad This field will not be visible if the Receive Only field is set to Enabled. Use
the UP/DOWN arrow keys to enable/disable Hot Keypad (DTMF while
transmitting) operation for this personality. When this feature is
enabled, the keypad is live during all dispatch operation. Pressing any
digit 0 (zero) through 9, “*”, or “#” will cause that digit to be
transmitted.
The default is Disabled.
Phone Operation This field will not be visible if the Receive Only field is set to Enabled. Use
the UP/DOWN arrow keys to select the type of phone service for this
personality:
The Phone Options function key will be active only when this field has been
set to a value other than None.
Note: If the radio has Manual Access with Live Dialing, this field
must be set to Unlimited to allow keypad access.
The default is None.
Signalling Use the UP/DOWN arrow keys to enable MDC or other signalling types
provided for this personality.
The MDC Options function key will be active only when this field has been
set to MDC.
The default is None.
List Only The user may only call pre-programmed numbers from
the phone list stored in the radio.
Unlimited The user may call phone numbers from the list, or
directly enter any number via the keypad.
Resp Only The user may only answer calls directed to the radio.
None DisableS phone operation for this personality.
MDC MDC is a MOTOROLA proprietary, 1200-baud digital
signalling protocol used for unit identification, selective
signalling and emergency features.
GE STAR A type of signalling protocol which provides features
such as Data Operated Squelch (DOS), Emergency Alarm,
and PTT-ID.
To Next Page
Loading...
Need help?
General