228
Emergency Use the UP/DOWN arrow keys to enable/disable this feature.
The default is Disabled.
Emergency Type This field will be visible only if the Emergency field is set to Enabled. The
following choices are available:
Both types of emergency support reverting (transmitting emergency
on a predetermined channel).
The default is Alarm Only.
Emer PTT ID Sidetone This field will be visible only if the Emergency Type field is set to Alarm and
Call. Use the UP/DOWN arrow keys to choose whether or not a
sidetone must be sounded when the emergency ID is being sent.
The default is Enabled.
Acknowledge Alert Tone This field will be visible only if the Emergency field is set to Enabled. Use
the UP/DOWN arrow keys to enable/disable the emergency
acknowledge beep which sounds when the radio receives
acknowledgment of its emergency call.
The default is Enabled.
Zone & Channel This field will be visible only if the Emergency field is set to Enabled. This
field is part of the Emergency Channel Revert table. The table contains
the channels pointed to in the Conventional personalities to which
the radio reverts when it enters emergency call mode. Enter the zone
numbers and the channel numbers in the table. Each MDC personality
will select one of these channels or choose itself. Emergency revert
channels must Conventional channels which are not receive-only, nor have
Quik-Call II enabled on them.
Alarm Only An emergency message is repeatedly sent to the base station until it
is cancelled in one of the following ways:
❒ All the allowed retries (both polite and impolite) have been sent;
❒ An acknowledgment is received from the base station;
❒ A first PTT press is executed; or
❒ A long press of the emergency button occurs.
Alarm & Call An emergency message is repeatedly sent to the base station until:
❒ All the allowed retries (both polite and impolite) have been sent;
or
❒ The radio receives an acknowledgment from the base station.
Once an acknowledgment is received from the base station, the user
can talk to the base station. An emergency PTT ID will be sent with
the voice on each PTT press. The emergency call is cancelled by a
long press of the emergency button.
To Next Page
Loading...
Need help?
General