20
Note: An archive file can be accessed without a radio being
connected.
F5 - PRINT MENU Prints selected codeplug data.
F6 - FILE MAINTENANCE Brings up a menu which allows you to easily create directories and
delete files without exiting the RSS.
F8 - FLASHport UPGRADE You must have FLASHport software installed on your computer in order to
access this menu. Brings up a menu from which you can view the radio’s
configuration, its FLASHkey contents, upgrade the codeplug, and
FLASH the radio.
F9 - SETUP Brings up a menu which is used to configure the RSS according to
specific user requirements. Default disk drives, communication ports
and even screen colors may be customized to suit your needs.
F10 - EXIT Used to quit the program and return to DOS. You will have to press this
key and then F2 to actually exit the program.
Note: Make sure that all desired codeplug changes have been
programmed back to the radio and that an archive copy has
been made. If this is not done, all changes will be lost since DOS
erases this data from the computer’s memory when you exit the
program.
To Next Page
Loading...
Need help?
General