88
Function Key Descriptions
F3 - RADIO CONFIG
(Radio Wide Configuration)
Used to change or view radio parameters and options that affect
overall radio operation (including Conventional and Trunking) such
as button and volume default settings. Typically, when you begin to
edit a codeplug, you should come to this menu and configure Radio
wide options first by working your way through the screens below this
menu. This will allow the options on other screens to reflect Radio
wide options. Some fields will not be visible if the radio does not support
that option.
F4 - TRUNK DATA
(Trunking Data Configuration)
A multi-level menu used to change or view Trunking personalities,
systems, etc. All lists (call, scan, phone) may be modified. This function
key will NOT be visible for radio models that support Conventional
operation only.
F6 - CONV DATA
(Conventional Data
Configuration)
Used to change or view Conventional parameters such as
personalities, buttons, and MDC signalling. This function key will NOT
be visible for Trunking-only radio models.
F8 - ZONE/CHN ASSIGN
(Zone/Channel Assignment)
Used to assign a group of channels (or talkgroups) to a particular zone
based on some common characteristic such as geographic location,
job function, signalling type, etc.
To Next Page
Loading...
Need help?
General