Powering Up the Radio
Follow the procedure to power up your radio.
Rotate the On/Off/Volume Control Knob clockwise
until a click sounds.
If successful:
• A tone sounds.
•
The green LED lights up.
If the Tones/Alerts function is disabled, there is no tone
upon powering up.
Check your battery if your radio does not power up. Make
sure that it is charged and properly attached. Contact your
dealer if your radio still does not power up.
Powering Off the Radio
Follow the procedure to power off your radio.
Rotate the On/Off/Volume Control Knob
counterclockwise until a click sounds.
Adjusting the Volume
Follow the procedure to change the volume level of your
radio.
Do one of the following:
• Turn the
On/Off/Volume Control Knob
clockwise to increase the volume.
• Turn the On/Off/Volume Control Knob
counterclockwise to decrease the volume.
NOTICE:
Your radio can be programmed to have a
minimum volume offset where the volume
level cannot be lowered past the
programmed minimum volume. Check with
your dealer or system administrator for more
information.
English
24 Send Feedback
To Next Page
Loading...