Press the programmed One Touch Access button
to send a predefined Quick Text message to a
predefined alias.
The green LED lights up.
If the message is sent, two chirps sound.
If the message cannot be sent, a low tone sounds.
Privacy
This feature helps to prevent eavesdropping by
unauthorized users on a channel by the use of a software-
based scrambling solution. The signaling and user
identification portions of a transmission are not scrambled.
Your radio must have privacy enabled on the channel to
send a privacy-enabled transmission, although this is not a
necessary requirement for receiving a transmission. While
on a privacy-enabled channel, the radio is still able to
receive clear or unscrambled transmissions.
Some radio models may not offer Privacy feature, or may
have a different configuration. Check with your dealer or
system administrator for more information.
Your radio only supports Basic Privacy.
To unscramble a privacy-enabled call or data transmission,
your radio must be programmed to have the same Privacy
Key as the transmitting radio. If your radio receives a
scrambled call that is of a different Privacy Key, you hear a
garbled transmission.
The green LED lights up when the radio is transmitting, and
blinks rapidly when the radio is receiving an ongoing
privacy-enabled transmission.
Turning Privacy On or Off
Follow the procedure to turn privacy on or off on your radio.
Press the programmed Privacy button.
Analog Scrambling
This is an analog-only feature designed to prevent
eavesdropping by unauthorized users on a channel by the
use of a software-based scrambling solution. The signaling
and user identification portions of a transmission are not
scrambled.
Your radio must have analog scrambling enabled on the
channel to send and receive an analog scrambling-enabled
transmission. While on an analog scrambling-enabled
English
Send Feedback 49
To Next Page
Loading...