NOTICE:
This feature is limited to radios with this function
enabled. Check with your dealer or system
administrator for more information.
Password Lock Features
This feature allows you to restrict access to the radio by
asking for a password when the device is turned on.
Your radio supports a 4-digit password input.
Use the Channel Selector Knob and the two Side Buttons
to enter password.
• Channel Selector Knob positions 1 to 9 represent
numbers 1 to 9, and position 10 represents number 0.
•
Side Buttons 1 and 2 represent numbers 1 and 2.
Accessing Radios by Using Passwords
Follow the procedure to access your radio by using a
password.
1 Power up the radio.
A continuous tone sounds.
2 Enter the current four-digit password.
• Use the
Channel Selector Knob to enter the first
digit of the password.
• Press Side Button 1 or 2 to enter each digit of the
remaining three digits of the password. When the
second digit of the password is entered, your
radio ignores any Channel Selector Knob position
change.
A positive indicator tone sounds for every digit
entered.
3 Your radio automatically checks the validity of the
password when the last digit of the four-digit
password is entered.
If successful, the radio powers up.
If unsuccessful:
• You hear a continuous tone. Repeat step 2.
•
After the third attempt, your radio enters into
locked state. A tone sounds. The yellow LED
double blinks. Your radio enters into locked state
for 15 minutes.
English
52 Send Feedback
To Next Page
Loading...