Motorola MOTOTRBO DP1400 - Selective Calls; Responding to Selective Calls

NOTICE:
The radio stops receiving the All Call if you switch to
a different channel while receiving the call. You are
not
able to continue with any programmed button
functions until the end of an All Call.
Selective Calls
A Selective Call is a call from an individual radio to another
individual radio. It is a Private Call on an analog system.
Responding to Selective Calls
Follow the procedure to respond to Selective Calls on your
radio.
When you receive a Selective Call:
• The green LED blinks.
•
Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period.
English
Send Feedback 37