• The LED turns off.
Starting Manual Site Search
Follow the procedure to start manual site search when the
received signal strength is poor in order to attempt to find a
site with better signal.
Press the programmed Manual Site Roam button.
•
A tone sounds.
• The green LED blinks.
If the radio finds a new site:
• A positive indicator tone sounds.
•
The LED turns off.
If the radio fails to find a new site:
• A negative indicator tone sounds.
• The LED turns off.
Lone Worker
This feature prompts an emergency to be raised if there is
no user activity, such as any radio button press or channel
selection, for a predefined time.
Following no user activity for a programmed duration, the
radio pre-warns you using an audio indicator once the
inactivity timer expires.
If there is still no acknowledgment by you before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to
this feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state, allowing voice
messages to proceed until action is taken. See Emergency
Operation on page 44
for more information on ways to exit
Emergency.
English
Send Feedback 51
To Next Page
Loading...