• Radio transmits at low power.
If unsuccessful:
• The Negative Indicator Tone sounds.
•
Radio transmits at high power.
Voice Operating Transmission
The Voice Operating Transmission (VOX) allows you to
initiate a hands-free voice-activated call on a programmed
channel. The radio automatically transmits, for a
programmed period, whenever the microphone on the
VOX-capable accessory detects voice.
You can enable or disable VOX by doing one of the
following:
• Turn the radio off and then power it on again to enable
VOX.
•
Prior to powering up the radio, connect the VOX-
capable accessory to the accessory connector to enable
VOX.
• Press the programmed VOX button and connect the
VOX-capable accessory to the accessory connector to
enable VOX.
• Change the channel by using the Channel Selector
knob to enable VOX.
• Press the
PTT button during radio operation to disable
VOX.
NOTICE:
Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or
system administrator for more information.
Turning Voice Operating Transmission
On or Off
Follow the procedure to turn VOX on or off on your radio.
Press the programmed
VOX button to toggle the
feature on or off.
NOTICE:
If the Talk Permit Tone is enabled, use a trigger
word to initiate the call. Wait for the Talk Permit
Tone to finish before speaking clearly into the
microphone. See Turning Talk Permit Tone On or
Off for more information.
English
56 Send Feedback
To Next Page
Loading...