Motorola MTM800 FuG

WARNING: Ethernet Expansion Heads are only compatible with Ethernet Remote Heads. Do
not mix the Ethernet control head with non-Ethernet control heads. Also ensure use of the
proper Ethernet cables to connect Ethernet Expansion Head with TSCH, eCH, or another
Ethernet Expansion Head. If not connected properly, transceiver can be broken.
2.4
Model Specifications
Table 5: General Specifications
Parameter Value
ETSI ETS 300 394-1
ETS 300 489-1
Type Number MTM800 FuG, MTM800FuG ET 380–430 MHz MT953CG
Temperature Range
for Transceiver
Operating -30 °C to +60 °C
Storage -40 °C to +85 °C
Power Supply Minimum: 10.8 VDC
Nominal: 13.2 VDC
Maximum: 15.6 VDC
Max. Current Approx. 4.5 A
Dimensions
(HxWxD) in mm
Transceiver with Enhanced Control Head, Dash
Mount (MTM800 FuG)
60 x 188 x 198
Dimensions
(HxWxD) in mm
Transceiver with Ethernet Expansion Head
(MTM800 FuG ET)
45 x 170 x 190
Ethernet Control Head (eCH) 60 x 190 x 40
Telephone Style Control Head (TSCH) 220 x 65 x 75
Weight in grams: Transceiver with Enhanced Control Head, Dash
Mount (MTM800 FuG)
1500
Weight in grams: Transceiver with Ethernet Expansion Head
(MTM800 FuG ET)
1330
Ethernet Control Head (eCH) 310
Telephone Style Control Head (TSCH) (ex-
cludes cable)
450
GNSS Performance Autonomous Acquisition Sensitivity -146 dBm / -176 dBW
Tracking Sensitivity -160 dBm / - 190 dBW
Table 6: Receiver Specifications
Parameter Value
Receiver Type Direct Conversion
Frequency Range TMO MT953CG 380–430 MHz
Frequency Range DMO MT953CG 380–430 MHz
Table continued…
68015000553-KC
Chapter 2: Model Information and Accessories
Send Feedback 23