Motorola MTM800 FuG

4.5.1
Installing Motorcycle Mount Enhanced Control Head
Planning is the key to fast, easy radio installation. Before a hole is drilled or a wire is run, inspect the
vehicle and determine how and where you intend to mount the antenna, radio, and accessories. Plan
wire and cable runs to provide maximum protection from pinching, crushing, and overheating.
NOTICE: Only persons who are competent and able to ensure that the complete installation
fulfils its regulatory requirements, such as ElectroMagnetic Compatibility (EMC) are allowed to
plan the installation.
When and where to use: The following list of considerations should, as a minimum, be checked
during installation planning:
Figure 35: Motorcycle Installation
1
2
3
4
5
6
7
8
9
10
11
12
Number Description
1 Motorcycle Mount Enhanced Control Head
2 Transceiver-to-Control Head Cable (PMKN4030_)
3 Chassis ground (PMKN4029_)
Table continued…
68015000553-KC
Chapter 4: Radio Installation
70 Send Feedback