Motorola MTM800 FuG

2
Requires Junction Box, GMLN5089_.
3
The cable, PMKN4104_, is only compatible when a Data Expansion Head Enhanced is not fitted as
part of a remote mount configuration. In this configuration, access to the TETRA PEI for IP Packet
Data and SDS services is available on the Data Expansion Head Enhanced and the Active Data Cable
PMKN4104_ cannot be used.
4
Used both for programming and data purposes.
CAUTION:
Complex installations requiring extended cable runs and Remote Mount Control Heads with
Audio Accessories such as the Telephone Style Handset (HLN7016_) may benefit from careful
routing of cables, and in some cases additional Electro Magnetic Compatibility (EMC) reduction
techniques such as using Ferrite or Toroid accessories. Suitable examples of Ferrite or Toroid
accessories are as follows:
• Ferrite Clamp, Part Number 91012044001, 91012044002, or 91012044003
• Toroid, Part Number 01015001001
2.6
MTM800FuG ET Accessories-to-Model Chart
NOTICE: Contact your service provider for further information on additional and specialized
accessories supported by MTM800 FuG ET.
Table 26: Control Heads
Accessory Part Number M1 M2 M3 M4 M5
Ethernet Data Expansion Control Head PMLN7009_ x
Ethernet Remote Control Head (eCH) Roman PMWN4024_ x
Ethernet Telephone Style Control Head (TSCH) Roman PMWN4025_ x
Table 27: Microphones
Accessory Part Number M1 M2 M3 M4 M5
BMI Hearer Speaker Microphone PMMN4070_ x x x x x
Compact Fist Microphone with a clip RMN5107_ x x x x
Desktop Microphone, Mobile Microphone Port RMN5106_ x x x
Fist Microphone with a clip
2
GMMN4063_ x x x x
Hearer Speaker Microphone with Earphone Jack and
Emergency Button
PMMN4086_ x x x x x
Heavy Duty Microphone RMN5111_ x x x x x
Push-Button PTT, for use with RMN5054_ or
PMMN4087_
RLN5926_ x x x x x
Smart Visor Microphone RMN5054_ x x x x x
Visor Microphone PMMN4087_ x x x x x
68015000553-KC
Chapter 2: Model Information and Accessories
Send Feedback 29